Indonesia Job Vacancy

• A coded welder with previous experience as a trainer I certifier, ability to discuss and talk about welding system, wave patterns and complex welding technology.
• Required to set up machine demonstrate their use and train our clients.
• Minimum 2 years of experience.

• Should have experience in assembling of switch boards. Knowledge of wiring, bus bar work.
• Should be able to read the drawing and work independently.
• Minimum 2-3 years of experience.
• Diploma in Electrical Engineering.

• Hands on experience and knowledge in. HT/LT electrical machineries such as industrial elevator, EOT cranes, air compressor, hydraulic and pneumatic controls.
• Minimum 5-7 years experience in the plant machinery maintenance.
• Diploma 1111 in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical works.

• Hands on knowledge in the field instrument installation, commissioning, repairs, maintenance, calibration of system and fully conversant with HART communication protocol.
• Minimum 5-7 years of experience in the plant of maintenance.
• Diploma/ITI in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical Works.

• Hands on experience in overhauling rotating equipment like Manual Valves, Pumps, Motors etc.
• Skilled to perform In-situ overhauling of mechanical equipment.
• Experienced in shutdown work.
• Minimum 4-6 years experience.
• Diploma HTI in Mechanical Engineering.

• Hands on experience in overhauling Safety Relief Valve / Pressure Relief Valve, Vacuum Valve, Control Valve.
• Experienced to perform hot setting of boiler valve.
• Skilled to perform in-situ overhauling of welded valve.
• Factory certified technicians will be given preference.
• Should be capable to perform refurbishment of Manual Valves..
• Experienced in shutdown works.
• Minimum 5 years experience.
• Diploma/ITI in Mechanical Engineer.

• Experience working in industrial chemical cleanings.
• Perform air and steam blowing.

• Preparing the Engineering Design, Completing site visits to gather required information. Develop the procedure for the operations accordingly.
• Completing the Operation, loading a working crew ensuring that the method statement is followed. Supervision of the job completion.
• Contact with the client during the operation.
• Following the QA QC directives for the operation. Chemical analysis, inspections.
• Completing a report after the service is completed.

• Maximum 35 years old;
  
• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic / Instrumentation from a reputable local University / Polytechnic;
  
• Minimum having 3 years relevant experiences at Power Plant or Heavy Industries;
  
• Good skill in instrumentation, control and automation system troubleshooting;
  
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interfaces;
  
• Accurate, reliable and enthusiasm;
  
• Capable and willingness to work under pressure and extended working hours;
  
• Good written and spoken English.

• Maximum 40 years old;
  
• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic / Instrumentation from a reputable local University / Polytechnic;
  
• Minimum having 5 years relevant experiences at Power Plant or Heavy Industries;
  
• Good skill in instrumentation, control and automation system troubleshooting;
  
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interfaces;
  
• Have good supervisory skill;
  
• Capable and willingness to work under pressure and extended working hours;
  
• Good written and spoken English.

• Minimum Diploma 3 years (03) in Electrical Engineering from a reputable local University
• Having 4 years relevant experiences in heavy industries
• Good skill in electrical machines (Generators, Motors, Switchgears, Transformers, DC Supply, etc) and its associated interlocking and protection system for all voltage levels (low, high and extra high voltage)
• Preferably having sound knowledge in PLC, Corrosion Control Equipment an Electromechanical Systems
• Energic, high enthusiasm, tough and reliable
• Good attitude, able to work in extended and call in times
• Good written and spoken English.

CONTROL & INSTRUMENT TECHNICIAN - Code: C&I
You will be responsible to perform maintenance, troubleshooting and repair of Field Control & Instrumentation equipment at Boiler & Turbines Plant Area.

Candidate for this position should possess :

• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic from a reputable local University / Polytechnic
• Having 3 years relevant experiences at heavy industries or power plants
• Good skill in instrumentation, control and automation system troubleshooting
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interlaces
• Accurate, reliable and enthusiasm
• Capable and willingness to work under pressure, extended working hours and Call In scheme
• Good written and spoken English.

Remuneration and benefits will be comparable with the best in this industrial sector. Please submit a fully detailed CV in English, latest on 22 August 2008 to:

PT YTL JAWA TIMUR
Tromol Pos No.36
Paiton - Probolinggo, Jawa Timur 67291
Or e-mail : recruitment@ytljt.com
Your CV will be kept in strict confidence
Please include a contact telephone number and recent photograph